 |
|
 
In the manufacturing sector of today, both production lots and deliverry dates are uncertain.
The PAS Series already features outstanding AC servomotor drive to ensure good repeatability, and to this has been added "external" setting up environment, and it offers an amazing improvement in bending costs.
|
|
PAS5020NET
(36sec,1.1MB)
|
PAS5020NET Linear scale
(25sec,0.8MB)
|
|
High Productivity Ultra Precision Press-Brake with an Open Network Environment |
|
|
| High Torque Motor Gives Direct Ram Drive |
|
 |
1.High torque servomotor enables both lower limit stop precision at the micron accuracy level and short cycle operation.
2.With the ACservo,operation without loss is possible.
3.The linear scale constantly monitors the ram position with micron class accuracy, and accurate ram positioning is attained irrespective of requisite load.
|
World First 4-axes independent Drive System Ram |
|
 |
1. 4-axes independent drive system ram enable the optimal compensation curve for any offset position.
2. The PAS80 press employs four motors in parallel array and this facilitates "Large press pressure","high-speed press work" and "High accuracy" simultaneously.
3. The optimal work compensation curve is automatically calculated,the optimal distribution of the target depth of the four axes can be attained.
|
Open Network NET type |
By using CADMAC-BEND,bending analysis work can be performed by external setup.
Direct input of BEND data Site setup time is greatly shortened.
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
Three-stage foot swich (standard)
|
Safety related (option)
|
|
|
|
|
Specifications |
|
|
| Model |
PAS5012
|
PAS5020
|
PAS8025
|
| type |
NETtype
|
NETtype
|
NETtype
|
| tonnage capacity |
500KN
|
800KN
|
| Overall bennding length |
1250mm
|
2000mm
|
2550mm
|
|
|
|
|
|
|
